What thicknesses and sizes are available for solid aluminum panels?

Solid aluminum panels are commonly available in thicknesses from 1.5 mm to 6.0 mm, with 2.0 mm, 2.5 mm, and 3.0 mm being the most frequently specified for exterior facades. Standard panel widths range from 1000 mm to 1600 mm, and lengths can be customized up to approximately 6000 mm, depending on the supplier’s equipment and handling capabilities. However, the final thickness and size must be confirmed against project drawings, structural load requirements, coating system, and applicable building codes. For Canadian projects, always verify local code requirements and consult a structural engineer for wind load and seismic design.
Why thickness matters for solid aluminum panels
Thickness directly affects the panel’s stiffness, flatness, wind resistance, and weight. Thicker panels provide greater rigidity and resistance to deformation but increase weight and cost. For exterior cladding, 2.5 mm and 3.0 mm are often chosen for large panels or high-wind areas, while 2.0 mm may be suitable for smaller panels or interior applications. The required thickness should be determined by structural calculations that consider wind pressure, panel span, support spacing, and deflection limits. Buyers should request a structural calculation report from the supplier or a qualified engineer.
Standard and custom sizes: what to specify
Standard widths are typically 1220 mm and 1500 mm, but custom widths can be produced. Length is often limited by coil width and handling equipment; common maximum lengths are around 6000 mm. When specifying size, consider:
- Joint layout: Panel size should align with the facade grid and accommodate expansion joints.
- Handling and installation: Larger panels require lifting equipment and may need thicker material to prevent damage.
- Coating and finish: Some finishes, such as anodized or PVDF, may have limitations on maximum panel size due to coating line capacity.
- Flatness: Larger panels are more prone to oil canning; thicker material or stiffeners may be needed.
Always confirm the maximum panel size with the supplier based on the chosen alloy, temper, and coating.
How to verify thickness and size with your supplier
When requesting a quotation, provide drawings or a detailed specification that includes:
- Required thickness (in mm) and tolerance (e.g., ±0.1 mm).
- Panel dimensions (width, length, and quantity).
- Alloy and temper (e.g., 3003 H24, 5052 H32).
- Coating type and thickness (e.g., PVDF 25 μm).
- Any special requirements such as perforations, stiffeners, or edge details.
Ask the supplier to confirm the actual thickness and size they can achieve, and request material certificates or test reports for thickness verification. Note that thickness tolerances can vary by standard; for example, ASTM B209 or EN 485 specify allowable deviations. Buyers should state the applicable standard in the inquiry.
Thickness, size, and cost: what affects the price
Price is influenced by aluminum ingot price, alloy, thickness, panel size, coating, quantity, packing, and delivery destination. Since we do not provide fixed prices, buyers should request a quotation based on the specific requirements. The final price will depend on the confirmed thickness, size, finish, quantity, and shipping terms. Always clarify whether the quotation includes coating, cutting, bending, and packing, and specify the Incoterms and delivery location.
Frequently asked questions
What is the most common thickness for exterior facades?
2.5 mm and 3.0 mm are widely used for exterior cladding, but the final choice should be based on structural calculations and local codes.
Can panels be supplied in custom sizes?
Yes, most suppliers offer custom widths and lengths, but maximum sizes depend on equipment and coating line capacity. Confirm with the supplier.
How is thickness measured and verified?
Thickness can be measured with a micrometer at multiple points. Request inspection reports or third-party test reports if required.
What alloy is used for solid aluminum panels?
Common alloys include 1100, 3003, and 5052. The choice depends on strength, formability, and corrosion resistance requirements.
Next steps: what to include in your inquiry
To receive an accurate quotation, please provide:
- Project location and applicable building codes.
- Panel drawings or a schedule with thickness, size, and quantity.
- Alloy and temper requirements.
- Coating specification (type, color, gloss, thickness).
- Any testing or certification requirements.
- Delivery destination and preferred Incoterms.
For further assistance, contact us at [email protected], WeChat: 13823463551, or visit our website https://aocao.cn. Company: 金霸建材(广东)有限公司, Address: 广东省佛山市南海区. We will confirm the final thickness, size, and price based on your specific requirements.